1300 301 755
Kattsafe

Sayfa is now Kattsafe

We’ve built a name for ourselves by continuously innovating safer, simpler height access and fall protection systems, and now it’s time for our business to evolve too.

Bringing everything we do under one new name makes it even simpler to work with us and use our products. And behind it all, we’re still the same team, quality products, and customer service that you’ve come to expect.

GW340 Walkway cleat installation criteria

Related documents

Video transcript

Hello and welcome to the Tek Talk for this week.

What we’re going to be going over is the walkway cleat (GW340). So, just to update you we’ve come out with a new extrusion for the walkway cleat, not that the installation will change but just to update you that there is a new extrusion coming out.

Now we’ll be showing you a short video on the requirements for installation of the walkway cleat. Thank you.

So 20 degrees is our maximum pitch for walkway. Anything after 20 degrees then requires stairs and steps and so on. Anything after 10 degrees we then require a cleated section on the walkway so something like this where it gets screwed to the to the walkway we will go over more details later.

So, anything after 10 degrees cleats are required on any type of any type of walkway system no matter what the slip rating is.

Now I’m going to be showing you about the walkway cleat. Walkway cleats are required whenever the walkway pitch is over 10 degrees but not more than 20 degrees. Now you must look at the installation manual because it does, the spacing between the walkway cleats, does depend on the pitch of the roof and that is in relation to Australian Standards so make sure you look at the installation manual on that.

So similar to the end bar and joiner bars, we basically just need to screw this walkway cleat into the webbing of the walkway. And in this case I’m going to take it just in this area here, not right at the end, just to give it a bit of extra strength. So, there we have it there, line it up. Ok, so there we have it. That’s the walkway cleat, and that is required whenever the walkway is over 10 degrees but not more than 20.

Thank you.