RAPTOR Rigid Rail - Rope access and glass replacement. RAPTOR - one system that handles both!

 

Project

Quay Quarter Tower, Sydney NSW

 

Installer

Rigcom Access

 

Products

RAPTOR Rigid Rail Systems

 

Situation

Quay Quarter Tower, a 50-storey commercial office development located in the heart of Sydney, comprises of a series of shifting glass volumes stacked upon each other. This technology enabled building, with its landscaped gardens and flexible work areas, is a diverse and environmentally considered space.

Choosing to recycle instead of demolish the building at 50 Bridge Street, the developers have taken the unique approach of retaining over 60% of the existing structure. Expansion and improvements will create a state-of-the-art tower that will be, in every sense of the word, a village.

Major requirements associated with this project were to enable safe and easy rope access for maintenance and window cleaning to the facades and, additionally, provision of a glass replacement system.

 

Solution - RAPTOR Rigid Rail Systems

With aesthetics at the forefront of this innovative building design, RAPTOR rigid rail was identified as the perfect choice when selecting a system to provide safe access to both the facades and the internal stair voids. RAPTOR's unobtrusive design provided the low visual impact that was in keeping with Quay Quarter Tower's clean architecture.

To enable light replacement and general maintenance to be undertaken RAPTOR GROOVE was suspended in the internal stair voids. The system allows operators to maneouvre easily and quickly around the area without the requirement for EWPs or other types of equipment which can cause major workplace disruption.

RAPTOR rigid rail systems were installed on the building facade enabling rope access for window cleaning and maintenance. Additional advantages of the system were the slimline appearance and RAPTOR's ability to be installed into the soffit, making it almost invisible to the eye.

Within the brief, there was a need to supply a system that could be used for the replacement of glass panels.

Various means can be used when replacing windows on tall buildings. Small windows are sometimes replaced from inside the building, the panels being transported to the desired location using lifts / elevators.

However, in most cases due to the large size of windows in commercial buildings they are lifted into place using cranes.  Cranes work well in the construction phase, but once the building is completed and these have been removed, smaller ground based cranes become necessary. Using these is not always practicable, as they have a large footprint making them difficult to place, especially in busy CPD locations. Furthermore, often they do not have a long enough reach. Another alternative is mobile elevated work platforms but again these can only be used on smaller buildings.

More popular, is the use of BMUs (Building Maintenance Units). Whilst these are an effective way of hauling replacement glass up the building, these machines are extremely costly to install, require regular expensive servicing, are difficult or sometimes impossible to retrofit and can take up a large amount of roof space.

Although the SAYFA technical team knew that RAPTOR would be a suitable product to utilise for glass replacement, some additional design aspects were required before the system could be manufactured and installed.

In the system application for Quay Quarter Tower, two RAPTOR rails were supplied - one for rope access personnel and one for the hoisting of the glass panels. This separation was necessary to have as an important safeguard in the event of system failure or an emergency / rescue situation.

 

Raptor rigid rail used for glass lifting

Example of RAPTOR rigid rail design when used as a glass replacement system. NOTE: This is not indicative of the system installed at QQT.

 

SAYFA was proud to be part of this landmark construction and look forward to providing our products on similar such environmentally progressive projects.

For more information on facade access solutions read: Providing safe access for facade maintenance.

 

Sayfa Australian Made Logo

Did you know that SAYFA is an Australian owned and operated company and that over 90% of our products are manufactured right here in Australia?

FIND OUT MORE ABOUT OUR RANGE OF AUSTRALIAN MADE PRODUCTS

 

Need help with your next project? SAYFA'S design service is here to assist. Contact us on 1300 301 755 or info@sales.com.au.

MAJOR TRADING PARTNERS

Goodman logo partners with Sayfa Group
Downer logo partners with Sayfa Group
BAE Systems partners with Sayfa Group
Metro Trains partner with Sayfa Group
Australian Navy partners with Sayfa Group
Bombardier partnering with Sayfa Group
Scentre Group partnering with Sayfa Group
Frasers Property partnering with Sayfa Group
Lend Lease partnering with Sayfa Group
JLL Jones Lang Lasalle partnering with Sayfa Group