XPLORA Through Bolt Anchor
- M16 x 300mm
- 15kN rated
- 316 stainless steel
- 0.7kg
- Rescue can be performed off the same anchor if situation permits
Details
The XPLORA AP124 Through Bolt Anchor is used in overhead applications where direct tension is required. The XPLORA Through Bolt Anchor has a high load capacity and is capable of multi-direction use. Custom lengths over 300mm can be supplied.
The XPLORA AP124 Through Bolt Anchor is designed and manufactured in accordance with requirements of Standards AS/NZS 1891.4:2009, AS/NZS 4488.2:1997 and AS/NZS 5532:2013
Note
- Suitable for fall arrest / twin rope access use.
Rating
- Fall arrest – 15kN
- Rope access – 12kN
Materials
- 316 stainless steel
Dimensions
- Eyebolt – diameter 60mm OD, 35mm ID
- Collar – 34mm OD x 16mm
- Threaded rod – M16 x 300mm
- Flange – 70mm OD x 16.5mm ID x 3mm
Weight
- 0.7kg
Compliance
XPLORA AP124 Through Bolt Anchor is designed and manufactured in accordance with requirements of Standards AS/NZS 1891.4:2009, AS/NZS 4488.2:1997 and AS/NZS 5532:2013
Product Warranty
10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection and Maintenance
This device requires periodic inspection and maintenance by a qualified safety inspector. See load testing note below.
Important Note
Minimum thickness of concrete – 150mm. Thickness less than 150mm requires compliance by having structure certified and the anchor proof load tested as per AS/NZ 1891.4:2009. Device is for personnel use only.
