XPLORA Mega Post Certification Label
- 100mm x 120mm
NOTE
- Aluminium post for raised fall arrest or rope access applications when mounting to concrete garden beds or steel structures.
- System design, supply, layout, installation and certification by a SAYFA approved installer, as per the manufacturer, SAYFA GROUP, installation instructions and relevant standards.
MATERIALS
- All components and accessories manufactured from high grade structural aluminium with stainless steel adaptor plate.
DIMENSIONS
- Height options – 400mm (AP150.0400) , 600mm (AP150.0600), 800mm (AP150.0800), 1000mm (AP150.1000)
- Overall weight – 13kg (1000mm)
- Base plate size – 400mm x 400mm (anchor fastener spacing 300mm)
SUBSTRUCTURE REQUIREMENTS
- Minimum concrete thickness – 200mm
- Concrete strength – minimum 32 mPa
- Concrete may need to be verified by engineer regarding reaction loads
- Minimum 200mm edge distance
FIXINGS
CHEMSET EXPOXY APPLICATION
- Stainless steel of HDG M16 allthread x 180mm
- 18mm hole, minimum 120mm embedment into concrete
- Recommended epoxy (chemset) adhesive – HILTI HIT RE-500
CAST-IN APPLICATION
- 300mm x 300mm u-bolt cage
- Minimum concrete thickness – 200mm
- Minimum 150 embedment
(Refer installation manual)
RATING
- 18kN: Rope access – 2 persons (including rescue)
- 15kN: Fall arrest – (including rescue)
- 18kN / 22kN – Static line end stanchion, corners and intermediates (ultimate load 18kN).
- Support structure integrity, suitability and fixing method to be assessed and determined by an engineer unless it is clear to a competent person prior to installation.
COMPLIANCE
XPLORA Mega Post is designed and manufactured in accordance with Australian Standards AS/NZS 1891, AS/NZS 5532 and AS/NZS ISO 22846 and relevant statutory OHS Codes of Practice/Guidelines.
TESTING
Testing and performance based on requirements of Australian Standards AS/NZS 1891 and AS/NZS 5532.
- Dynamic load test – 18kN
- Static load test – 18kN
PRODUCT WARRANTY
10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.
INSPECTION AND MAINTENANCE
Inspection and certification required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Australian Standards AS/NZS 1891 and AS/NZS 5532. (Refer installation manual.)
IMPORTANT NOTE
Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.
