XPLORA Pigtail Lateral Restraint Anchor, 80mm
- Through bolt
- 80mm
- 2kN
NOTE
- 2kN is min load as per Australian Standards. Anchor purpose must be considered to define actual load.
WARNING
- Work positioning for rope access systems only.
RATING
- Lateral restraint -2kN*
*2kN minimum load as per Australian Standards. Anchor purpose must be considered to define actual load.
MATERIALS
- Stainless steel finish
DIMENSIONS
- 80mm
COMPLIANCE
The XPLORA Pigtail Lateral Restraint Anchor is designed and manufactured in accordance with requirements of AS/NZS ISO 22846.
TESTING
Testing and performance of the XPLORA Pigtail Lateral Restraint is based on AS/NZS1891.4:2009. & AS/NZS5532.2013. 2kN is a minimum load as per Australian Standards and anchor purpose must be considered to define actual load.
PRODUCT WARRANTY
10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.
INSPECTION AND MAINTENANCE
The XPLORA Pigtail Lateral Restraint Anchor system needs to be checked and recertified by a competent height safety inspector every 12 months for non corrosive environments or 6 monthly for corrosive or harsh environments. (To be determined by competent person depending on the severity of surrounding conditions.)
IMPORTANT NOTE
The XPLORA Pigtail Lateral Restraint Anchor is designed for work positioning for rope access systems only and cannot be loaded to greater than 2kN.