PACE 600 Walkway Support Levelled Batten

  • Welded to specific roof pitch
  • Pitched roofs 7°+
Note
Warning
  • Fixings to roof deck not included.
  • Slopes greater than 12° require guardrail as per AS 1657:2013, 5.4.1.
Material
  • Roof battens – mill finish profiled aluminium
Dimensions
  • Walkway spacer batten – 700mm (L) x 50mm (H) x Angle
Fixings
  • Walkway to batten – 35mm SD class 3 tek screw
  • Batten to roofdeck – 5mm construction grade Bulbtite rivet

Note: Max. batten increments – 670mm.

Roof Pitch Installation
  • Can be installed up a slope to max 20° (cleats are required after 10°).
  • To be levelled across a slope when greater than 7°.
Working Load Limit
  • Span 500mm – Max load capacity: 4.8kPa / Max deflection: 2.5mm
  • Span 670mm – Max load capacity: 2.5kPa / Max deflection: 3.2mm
  • Span 700mm -Max load capacity: 1.8kPa / Max deflection: 3.5mm

Note: All deflection and/or load data is based on standard 1.3mm x 600mm walkway panel.

Compliance

Pace 600 Walkway System is designed to comply with Australian Standard AS1657-2018 and relevant statutory OHS Codes of Practice / Guidelines.

Product Warranty

10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

Inspection and Maintenance

Visual inspection for any damage or loose fixings must be done periodically and prior to use. No certified maintenance is required. Basic wear and tear preventative maintenance is recommended, as per manufacturer’s specifications and recommendations.

Important Note

Failure to supply and/or install proprietary product in accordance with above specifacations and installation / usage guidelines voids complete system certification and/or warranty.