ZERO Fall Arrest Harness with 2.0M Energy Absorbing Lanyard fixed to the Harness
- Quick connect buckles
- 136kg rated
- Adjustable length lanyard
- Scaffold hook connection
General purpose harness with front and rear D attachment points. Energy absorbing lanyard with snap hook connected to rear dorsal. Fully adjustable with quick connect buckles for ease of use. Fall indicators for continued safety. Suitable for roofing, construction workers, vertical climbing, scaffolders, access equipment and general Tradesperson.
- Rated to 136kg (for use with standard fall arrest lanyard)
- Material – manufactured from polyester webbing
- Weight – 1.5kg (includes all buckles and D-rings)
- Load rating – 23kN
- Material – manufactured from high tensile steel, zinc plated
- Weight – 0.6kg
Working Load Limit
All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
ZERO equipment is manufactured and tested to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available.
3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection and Maintenance
Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.
Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.