Icon for SAYFA Resource Library

ZERO Energy Absorbing Lanyard with Karabiners
  • 0.7kg

The ZERO energy absorber is designed to deploy under excessive load to minimise the chance of severe injury on the user. The energy absorbing lanyard reduces the fall load by deceleration to under 6kN when used in a free-fall or unrestrained fall. The internal woven component acts in the same way as a typical shock pack, tearing on impact and reducing the forces in the event of a fall.

Energy Absorber
  • Load rating – 136kg – 1 person
  • Material – manufactured from 100% polyamide
  • Weight – 0.7kg (includes end karabiners)
  • Load rating – 23kN
  • Material – manufactured from high tensile steel, zinc plated
  • Weight – 0.6kg
Working Load Limit

All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.


ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.


ZERO equipment is manufactured and tested to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available.

Product Warranty

3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.

Inspection and Maintenance

Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.

Important Note

Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.