EDGE Karabiner Twist-lock Type
- 45kN rated
The large 45kN karabiner is designed as a primary connection point from any fall arrest device. Also, used to connect to secondary or diversion anchors when used for roof access with a proprietary fall arrest anchor system. Made in Italy.
- For more information watch our harness gear videos.
- Load rating – 45kN
- Material – manufactured from high tensile steel, zinc plated
- Weight – 0.3kg
Working Load Limit
All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
Individually tested, this equipment is manufactured to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available
3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection and Maintenance
Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.
Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.