APEX Industrial Height Safety Helmet
- Head protection for work at heights and falling objects
- Complies to EN 397:2012 & AS/NZS 1801:1997
- Chinstrap releases at force over 150n
Description
A collation of the best design features for an industrial quality helmet for work at height plus general site safety. Quality construction ensures the Exo is built to last and has provision for all the standard accessory types are needed on the job.
Impact and penetration protection meets and exceeds AS/NZS 1801.
View our video: Why you should wear a helmet
Working Load Limit
All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
Compliance
ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
Testing
Individually tested, this equipment is manufactured to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available
Product Warranty
3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection and Maintenance
Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.
Important Note
Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.
