APEX Multi Impact Rope Access Helmet
- Head protection from falls, falling objects and impact
- Complies to EN12492
- Exceeds AS/NZS 1801
- Non-releasing chinstrap
Designed to mountain engineering certification with a collation of the best design features for an industrial quality helmet for work at height and general site safety. Quality construction ensures the helmet is built to last and has provision for all the standard accessory types that are needed on the job.
View our video: Why you should wear a helmet?
- Stocked in graphite only. Additional colours available, lead times apply.
- For more information watch our harness gear videos.
Working Load Limit
All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
Individually tested, this equipment is manufactured to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available
3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection and Maintenance
Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.
Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.