ZERO Fall Arrest Rescue Kit with Pole

  • Includes extendable pole for rescue/recovery – 3.5M
  • 50.0M rope length
  • 200kg rated
Details

The RescuePack is designed for recovery by lowering or lifting. The RescuePack is the most versatile remote rescue system available anywhere. It is a simple, self-contained system designed to recover a suspended person from almost any situation. RescuePack can recover a suspended casualty by raising and/or lowering them. The optional deployment of the pulley system when raising simplifies the system for users, reduces potential rope twist and minimises the amount of rope required.

For more information on what to be aware of when performing a rescue, visit our page: What happens after your fall arrest equipment saves you?

Note
  • Kit is recommended for self-evacuation or recovery of a casualty.
  • For more information on the ZERO range watch our harness gear videos.
Warning
  • Only to be used by personnel trained in rescue and rope access operations.
Harness Assembly
  • Load rating – 136kg (for use with standard fall arrest lanyard)
  • Material – manufactured from polyester webbing
  • Weight – 1.3kg (includes all buckles and D-rings)
Rope Line
  • Load rating – 1 person
  • Material – manufactured from nylon, 11mm kernmantle rope
  • Length – 50.0M
Working Load Limit

All fall arrest harness gear is rated at 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.

Compliance

ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.

Testing

Individually tested, this equipment is manufactured to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available

Product Warranty

3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.

Inspection and Maintenance

Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1. (Refer operation manual.)

Important Note

Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.