ZERO Suspension Trauma Strap Pair

  • To suit fall arrest harness
  • 0.7kg
Details

The ZERO suspension set provides relief for the user after a fall. By deploying the outer cover, the user is able to stand on the straps to relief any untoward pressure.

For more information on suspension trauma visit our page:  What happens after your fall arrest equipment saves you?

Note
  • Designed to prevent suspension trauma by allowing the operator to stand and relieve pressure on the inner thigh.
  • For more information on the ZERO range watch our harness gear videos.
Harness Assembly
  • Load rating – 136kg (for use with standard fall arrest lanyard)
  • Material – manufactured from polyester webbing
  • Weight – 1.3kg (includes all buckles and D-rings)
Working Load Limit

All fall arrest harness gear is rated at 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.

Compliance

ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.

Testing

Individually tested, this equipment is manufactured to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available

Product Warranty

3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.

Inspection and Maintenance

Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1. (Refer operation manual.)

Important Note

Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.