Brochure Icon for Fall Arrest  Brochure Icon for Rope Access SAYFA icon for fall protection and height safety product install manuals Icon for fall arrest operation manualIcon for rope access operation manual Icon for SAYFA Warranties and CertificationsA Icon for SAYFA Resource Library

RAPTOR 80 Rigid Rail, End Stop Bracket

RAPTOR 80 Rigid Rail is a proprietary fall arrest and rope access system suitable for multiple users with a spanning capability of 2.0m. Rigid rail is a system providing continuous and effective fall protection and/or work positioning systems. RAPTOR 80 Rigid Rail is perfect for compact and out of sight requirements and is easily installed using the RAPTOR T-Bolt Mounting Bracket. Ideal applications for Raptor Rail would be fall protection above work areas, under canopies and facades, for general maintenance and cleaning requirements. The system incorporates high quality engineered components designed for use in commercial and industrial applications.

MATERIALS
  • Rail – profiled hi-tensile aluminium
  • Trolley – stainless steel including 6 sealed bearings
  • Mounting brackets – profiled stainless steel and/or aluminium
  • Mounting fixings – M12 stainless steel fixings
FIXINGS (INTO SUPPORT STRUCTURE)
  • Steel fixing – M12 bolt or threaded stud
  • Concrete fixing – M12 mechanical concrete anchor

Note: May vary depending on application

WEIGHT
  • 6 kg / per linear metre of rail section (approximate)
WORKING LOAD LIMIT

Single person use – 180kg per trolley (user/equipment)

  • Maximum horizontal pitch for safe use – 3°
  • Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation
RAPTOR RAIL SPAN INFORMATION

RAPTOR RAIL ONLY

  • 1 User Per Span
  • Max span length – 4000mm
  • Support structure design load – 15kN
  • 2 Users Per Span
  • Max span length – 3200mm
  • Support structure design load – 21kN
  • 3 Users Per Span
  • Max span length – 2500mm
  • Support structure design load – 27kN
  • 4 Users Per Span
  • Max span length – 2000mm
  • Support structure design load – 33kN

RAPTOR WITH LONGSPAN SUPPORT

  • 1 User Per Span
  • Max span length – 6000mm
  • Support structure design load – 15kN
  • 2 Users Per Span
  • Max span length – 5500mm
  • Support structure design load – 21kN
  • 3 Users Per Span
  • Max span length – 4800mm
  • Support structure design load – 27kN
  • 4 Users Per Span
  • Max span length – 4200mm
  • Support structure design load – 33kN
COMPLIANCE

RAPTOR Rigid Rail is designed to comply with Standards AS/NZS 1891.2:2001, AS/NZS 1891.4:2009, AS/NZS 1891.4.2009 and relevant statutory OHS Codes of Practice/Guidelines.

PRODUCT WARRANTY

10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

INSPECTION AND MAINTENANCE

Inspection and certification every 12 months by a Height Safety Equipment Inspector in accordance with manufacturer’s specifications and requirements of Standard AS/NZS 181.1:2009

IMPORTANT NOTE

Failure to supply and/or install proprietary product in accordance with above Standard and codes, specifications and instructions voids complete system certification and/or warranty.

Sayfa recommends that inspection ceiling hatches are installed in areas with limited access (such as plaster) where access for annual inspection certification (trolley and rail connection) is required. If this method is not achievable, the system will need to have photographic detailed evidence of all connections and the system will need be load tested to 7.5kn.