RAPTOR Rope Access Needle, 1200 A-Frame – 1500 Extension

  • 1200mm A-Frame height
  • 1500mm cantilever
  • Back span options 1800, 2400, 3000mm
  • 400kg ultimate safe working load
  • Single person, 12kN rate
NOTE
  • Rear attachment not included
SPECIFICATION

Industrial use, aluminium construction, RAPTOR Rope Access Needle by SAYFA GROUP with rescue and ability for access over non load-bearing areas for window cleaning and facade maintenance. System design, supply, layout, installation and certification by a SAYFA approved installer, as per the manufacturer’s installation instructions and current standards.

MATERIALS
  • Boom and A-frame – manufactured from high grade structural aluminium
  • Connection brackets, end caps, supports – powder coated stainless steel
  • Locking pins – galvanised coated steel, 16mm
RATING
  • 12kN single person use plus rescue
  • 15kN fall arrest
  • 400kg safe working load
DIMENSIONS

OH404.1200: A-Frame Height – 400mm / Cantilever – 1200mm / Back Span – 1800mm

OH404.1500: A-Frame Height – 400mm / Cantilever – 1500mm / Back Span – 2400mm

OH408.1200: A-Frame Height – 800mm / Cantilever – 1200mm / Back Span – 1800mm

OH408.1500: A-Frame Height – 800mm / Cantilever – 1500mm / Back Span – 2250mm

OH408.1800: A-Frame Height – 800mm / Cantilever – 1800mm / Back Span – 2700mm

OH412.1200: A-Frame Height – 1200mm / Cantilever – 1200mm / Back Span – 1800mm

OH412.1500: A-Frame Height – 1200mm / Cantilever – 1500mm / Back Span – 2250mm

OH412.1800: A-Frame Height – 1200mm / Cantilever – 1800mm / Back Span – 2700mm

OH404.1200: A-Frame Height – 400mm / Cantilever – 1200mm / Back Span – 1800mm

COMPLIANCE

The RAPTOR Rope Access Needle System is designed to conform with requirements of the Australian & New Zealand Standards AS/NZS 5532:2013 AS/NZS/ISO 22846, AS/NZS 1891 and relevant codes of practices and guidelines.

TESTING

Testing and performance of the RAPTOR Rope Access Needle System is based on requirements of Australian Standards AS/NZS 1891 and AS/ NZS 5532.

  • Dynamic load test – 15kN
  • Static load test – 12kN
PRODUCT WARRANTY

3 years from date of purchase subject to correct installation. Use and maintenance of the RAPTOR Rope Access Needle System to be in accordance with manufacturer’s specifications and recommendations. (This excludes wearing parts.) It has a design life of 15 years.

INSPECTION AND MAINTENANCE

Inspection and certification required every 12 months by a competent person in accordance with manufacturer’s specifications and requirements of Australian Standards AS/NZS 1891 and AS/NZS 5532. (Refer installation manual.)

IMPORTANT NOTE

Failure to supply and/or install proprietary RAPTOR Rope Access Needle System in accordance with above standards and codes, specifications and instructions voids complete system certification and/or warranty. Needle connection details and loading to structure must be verified by a structural engineer prior to installation.